Feed granulator specific operating rules and precautions
In the feed processing industry, feed granulation is a crucial link. In order to ensure the quality of feed and production efficiency, the correct operation of feed granulator is essential. This paper will introduce the specific operation procedures and precautions of feed pelleting machine to ensure the safe and efficient feed pelleting process.
Checking before starting is the first step in the operation of feed granulator. Before starting the machine, we need to carefully check whether there is material, caking or debris in the granulator, and ensure that the connected parts are not loose. At the same time, the state of the die and the roll should be checked, and the gap between them is normal. The correct operation is that when there is no powder in the machine, the press roller should be able to turn just enough. If the clearance needs to be adjusted, it can be achieved by rotating the screws on both sides of the hopper, but it must be ensured that the working clearance of the two rollers is equal. After idling for 1 minute after starting up and confirming that the machine can work normally, the raw material mixture can be added to make the motor work under rated load and avoid overload operation. It is also necessary to confirm that the die is rotated clockwise to ensure the granulation effect.
Next is the specific granulation operation. Gradually put the raw material mixture into the hopper, ensuring that the mixture in the hopper is close to 3/4 capacity, and catch the formed particles with the tray. After granulation is completed, the machine should be idled for 1to2 minutes to ensure that the feed is crushed and discharged before stopping. At the same time, according to the size of the diameter of the experimental fish, the cutting knife is correctly adjusted to ensure the quality of granulation. After pelletizing, clean the test bench, pelletizing machine and laboratory to keep the working environment clean.
In the process of operating the feed granulator, the following matters need to be noted. First of all, the feed granulator must be started without load, and it is strictly prohibited to start with load. During operation, the working current of the feed machine shall not exceed the rated current to avoid damage to the machine. During operation, it is absolutely not allowed to open the die cover and side cover to avoid danger. If the feed machine is stuck, do not use the hand or iron bar and other tools to clean up the blockage, but immediately power off, and remove the material in the die before restarting, so as to avoid personal and equipment accidents. In addition, if there is abnormal heat around the hopper or strong vibration of the fuselage, it should be stopped immediately and processed and adjusted. It is never permitted to force the machine to start in case of material blockage.
Finally, when carrying out machine maintenance, be sure to turn off the main power supply to ensure safety. Maintaining the normal operation of feed pelletizing machine, cleaning and checking the machine regularly, discovering and repairing faults in time can extend the service life of the machine and improve production efficiency.
With proper operating procedures and precautions, we can ensure the safe operation of feed pelletizing machines and improve the efficiency and quality of feed processing. Efficient feed granulation process will bring greater economic benefits to livestock and poultry farming and feed production enterprises.
Rongda Machinery is an innovative high-tech enterprise specializing in the research and development, design and manufacturing of biomass molding fuel machinery, feed machinery, compound fertilizer machinery, forage machinery, complete feed engineering, complete biomass molding fuel engineering and all its accessories. The company has mature technology, professional technical personnel and rich production experience, to provide domestic and foreign customers with engineering design, product manufacturing, installation, customer training and other integrated services.
The main products of Rongda company are feed granulation equipment, biomass pellet granulation equipment, crushing equipment, mixing equipment, cooling screening equipment, cleaning equipment, conveyor, elevator general equipment and other single machine, feed, biomass pellet complete turnkey project
The company has won the favor of customers at home and abroad with its reliable quality, excellent service and reasonable price. Now the customers of Rongda company have been all over Southeast Asia, Europe, the Middle East and many other countries. After several years of continuous exploration and innovation, the biomass molding fuel pellet machine developed by the company has been very mature, and has been praised by domestic and foreign customers. Therefore, the company has gained great influence in the biomass pellet fuel industry and is the leader in the biomass pellet fuel equipment industry.
The company has passed CE certification, GOST certification and ISO9000 quality system certification. Rongda company will always take "quality first, service first, reasonable price" as the business purpose, "customer win-win" as the business way, "long-term development" as the business purpose, hand in hand with domestic and foreign customers, mutual promotion, create a win-win situation.